This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the usability of this website, serve for direct advertising or simplify interaction with other websites and social networks, will only be used with your consent. Read more.

For each/every radio module we provide a StarterKit with comprehensive features and application. Our Starter kits are technology specific and containing a comfortable GUI and easy to use installation package. This makes it easy for you to evaluate new technologies and proof the performance of our products.

Productname   Specification   Description

IoT DevKit for LoRa®

Frequency: 868 MHz

LoRa™ Alliance Certified

The kit contains a Lite Gateway, a Mote II, a iM880B on a Demo Board and an Arduino Shield. With those units you can easily setup your own LoRaWAN® network.


Mote II for LoRa®

Frequency: 868 MHz
RF power: up to +14 dBm
Sensitivity: down to -138 dBm

LoRa™ Alliance Certified

The Mote II is a demonstration platform intended to be used in a variety of applications. It is fitted with the low power, bidirectional radio module iM881A-M and sensors like accelerometer, altimeter, and temperature sensor. Additionally it provides a GPS module, a display and three buttons and LEDs. The firmware will be provided by the open source github project lora-net


WiMOD Shield for Arduino®
(WSA01-iM880B)

Frequency: 868 MHz
Range (LoS): up to 15000 m
RF power: up to +19 dBm
Sensitivity: down to -137 dBm
Arduino™ UNO R3 pinout

The WiMOD Shield for Arduino™ (WSA01-iM880B) is a development, test and demonstration board that enables users of the Arduino™ (or compatible boards) to use WiMOD radio modules based on LoRa® technology.


LoRa® Lite Gateway

Frequency: 868 MHz
RF power: up to +20 dBm
Sensitivity: down to -138 dBm

LoRa® Lite gateway (LGW) is a demonstration and evaluation platform consisting of the pre-certified concentrator iC880A, a RaspBerry PI, a pre-configured SD-card, a power supply, a 868MHz antenna, and a plastic housing. This device enables LoRa® customers to demonstrate and evaluate LoRaWAN® features, and can be easily connect to existing servers (e.g. thethingsnetwork , Loriot). The source code of firmware is provided by the open source github project lora-net (https://github.com/Lora-net/lora_gateway)


SK-iM240B

Frequency: 2.4 GHz
Range: up to 700 m
RF datarate: 250 kbps
The Starter Kit is a plug & play solution to explore the features and capabilities of the WiMOD radio modules.

SK-iM282A

Frequency: 2.4 GHz
Range (LoS): up to 10000 m
RF power: up to +12 dBm
Sensitivity: up to -130 dBm

The Starter Kit serves as a development, test and demonstration platform for the iM282A and for evaluation of the Long Range Radio module and its possible applications. (LoRa®)

SK-iM820A

Frequency: 2.4 GHz
Range: up to 500 m
RF data rate: 250 kbps

The Starter Kit is a plug & play solution to explore the features and capabilities of the WiMOD radio modules.

SK-iM871A

Frequency: 868 MHz
Range: up to 1100 m
RF datarate: 1.2 – 250 kbps

The Starter Kit serves as a development, test and demonstration platform for the iM871A and for evaluation of the Wireless M-Bus module and possible applications.

SK-iM880B

Frequency: 868 MHz
Range (LoS): up to 15000 m
RF power: up to +19 dBm
Sensitivity: up to -137 dBm

The Starter Kit serves as a development, test and demonstration platform for the iM880A and for evaluation of the Long Range Radio module and its possible applications. (LoRa®)

SK-iM881A

Frequency: 868 MHz
Range (LoS): up to 12000 m
RF power: up to +14 dBm
Sensitivity: down to -137 dBm

LoRa™ Alliance Certified

The Starter Kit serves as a development, test and demonstration platform for the iM881A and for evaluation of the Long Range Radio module and its possible applications.

PA-iM871A Packet Capturing
Packet Visualization
Traffic Monitoring

The Wireless M-Bus Analyzer tool provides an easy to use graphical user interface for rapid troubleshooting and maintenance of your Wireless M-Bus network.