Smart Metering
The Smart Metering application is computer-aided measurements, controls and determinations of energy supply and energy consumption. Intelligently networked meters for electricity, water and gas can benefit both private households and businesses. To make smart metering possible, the applications in addition to the meter include additional measuring systems as well as input and output devices and software. Especially the field of wireless solutions is relevant for this technology, as the data can be transmitted by radio to the various measurement service providers.
RWE Smart Home Power Controler
The RWE SmartHome Power Control system of the RWE Effizienz GmbH is a Solution of IMST. In conjunction with the SmartHome central control unit, RWE SmartHome Power Control allows the straightforward reading of meter data from an electronic household meter (EDL21). The system consists of the customer specific designed infrared reader iM871A-ir and the IMST’s wireless M-Bus USB stick iM871A-usb. Main component of both devices is the radio module iM871A from IMST. The magnetically adhering reading unit has an infrared interface for reading the current power and energy of the electronic household meter. Communication between iM871A-ir and iM871A-usb is done via Wireless M-Bus radio protocol.
Produced by RWE
CLR-ER. Intelligent control and monitoring of energy elements
Based on the new LoRa® technology, the CLR-ER radio module allows control and monitoring of energy-consuming elements. It becomes possible to monitor the absorbed energy for diagnostic purposes, activate an On / Off command to enable / disable the power supply, and possibly perform dimming (for example in the case of LED lamps).
CLR-ER has been designed and produced with a high degree of customization in order to allow easy adaptation to the requests of different applications.
Produced by COING
Sense2Grow Wireless IO
With the Sense2Grow Wireless IO you have the possibility to monitor and read your business systems and sensors wireless. The WIO uses standard interfaces and together with the support of configurable software, the connection is established. The WIO communicates via LoRa® RF technology. Therefore, you are guaranteed a reliable wireless communication, both in the greenhouse, buildings and industrial site as well as in the open field.
Produced by Technolution
EGK-LW22PLG - LoRaWAN® Energy Meter plug with On/Off
The EGK-LW22PLG is a compact meter that can monitor and switch a 230Vac-16Amp Load, equipped with a rechargeable battery for mains outage detection, configurable default power-on status, setup and upgrade via NFC with LoRa Tool App.
Produced by Enginko
MCF-LW12MET - LoRaWAN® Mono-Phase Energy Metering with I/O
This compact metering can be used for monitoring and checking the power of electronic devices, and can remotely switch devices on/off and read the state of a digital input.
Produced by Enginko
MCF-LW13IO - LoRaWAN® wireless actuator
This device can transmit the status of its inputs and control the outputs through the LoRaWAN® network. Can be used for industrial process control and home automation, water treatment, agriculture irrigation and similar applications.
Produced by Enginko
Smart Farming
Smart Farming describes the use of information and communication technology in agriculture. In addition to sensor- and actor-based applications, geo-positioning and positioning systems, big data as well as UAVs and robotics offer an ever greater opportunity to revolutionize daily farm work. In addition to facilitating the work processes, a greater transparency of the processes through the accurate recording and processing of the data is given. The farmer thus has the opportunity to give the state accurate information about how he works and that he fulfills certain regulations, for example for organic certifications.
Clickey Tempsens Pro
Professional device for recording the temperature of objects, machines, lines, areas and refrigerators. Including alarm function when temperature is outside the set ranges. Can be used for automatic temperature registration.
Produced by CLICKEY
Sense2Grow Celsius
With the Sense2Grow Celsius you have a wireless climate sensor that can accurately measure temperature and humidity. The Celsius is fitted with a solar cell with battery which makes recharging unnecessary. When you hang the Celsius in a dark room you can suffice with recharging the battery on an annual basis. For an even higher accuracy, the Celsius is fitted with a ventilator that can be operated remotely. You are guaranteed a reliable wireless communication, both in the greenhouse, buildings and industrial site as well as in the open field.
Produced by Technolution
Sense2Grow Smoke
With the Sense2Grow Smoke you have a wireless smoke detector that can locate smoke sources quickly and accurately. The Smoke is fitted with a solar cell with battery which makes recharging unnecessary. When you hang the Smoke in a dark room you can suffice with recharging the battery on an annual basis. You are guaranteed a reliable wireless communication, both in the greenhouse, buildings and industrial site as well as in the open field. The status of the system and the sensor batteries are displayed on your dashboard.
Produced by Technolution
MCF-LW13IO - LoRaWAN® wireless actuator
This device can transmits the status of its input and control the output through the LoRaWAN® network. Can be used for industrial process control and home automation, water treatment, agriculture irrigation and similar applications.
Produced by Enginko
MCF-LW12TERWP - LoRaWAN® outdoor environmental sensor
This IP67 battery powered sensor reads temperature, humidity and pressure and sends collected data over the LoRaWAN® network. Ideally suited for a wide range of applications such as weather stations, urban monitoring, air quality, industrial, environmental or farming projects.
Produced by Enginko
MCF-LW12CO2 - LoRaWAN® indoor environmental sensor
This device reads temperature, humidity, pressure, light intensity, VOC and CO2 and sends collected data over the LoRaWAN® network. Ideally suited for a wide range of applications such as building automation, condition monitoring, predictive maintenance, security, healthcare and many more use cases.
Produced by Enginko
Smart City
Smart City describes the use of information and communication technologies in urban infrastructures to improve the quality and performance of urban services in the supply, energy and transport sectors. The optimization thus benefits the citizens as well as the municipalities themselves. In order to enable the best possible networking of a city, the various applications must be networked together by IoT in order to ensure smooth processes.
Power 365 Street Lighting
Fonroche Lighting guarantees 365 nights per year operation of all its off-grid solar streetlight systems thanks to a combination of:
• LoRa remote management solution
• a solar panel that rapidly and efficiently captures the sun’s energy
• a battery that stores at maximum capacity
• an LED bloc that converts the stored energy to light
Produced by Fonroche Lighting
inteliLIGHT® FRE-220-NEMA-L LoRaWAN® compatible luminaire controller
inteliLIGHT® is a street lighting remote management solution that ensures that the right amount of light is provided where and when needed. In-depth grid management gives an accurate real-time feedback of any change occurring along the grid, reduces energy loss and offers advanced maintenance optimization tools. Using the existing infrastructure, you save money and transform the existing distribution level network into an intelligent infrastructure of the future.
Produced by Flashnet
Sense2Grow Celsius
With the Sense2Grow Celsius you have a wireless climate sensor that can accurately measure temperature and humidity. The Celsius is fitted with a solar cell with battery which makes recharging unnecessary. When you hang the Celsius in a dark room you can suffice with recharging the battery on an annual basis. For an even higher accuracy, the Celsius is fitted with a ventilator that can be operated remotely. You are guaranteed a reliable wireless communication, both in the greenhouse, buildings and industrial site as well as in the open field.
Produced by Technolution
Sense2Grow Smoke
With the Sense2Grow Smoke you have a wireless smoke detector that can locate smoke sources quickly and accurately. The Smoke is fitted with a solar cell with battery which makes recharging unnecessary. When you hang the Smoke in a dark room you can suffice with recharging the battery on an annual basis. You are guaranteed a reliable wireless communication, both in the greenhouse, buildings and industrial site as well as in the open field. The status of the system and the sensor batteries are displayed on your dashboard.
Produced by Technolution
Urbana RFTN luminaire controller
Urbana RFTN Module is a Plug&Play control device for general lighting applications. The device incorporates the multifunctional control unit which is able to track power parameters and set operating values. This board is a plug-and-play solution for integrating any luminaire into Urbana IoT Platform. The device deploys LoRa™ radio technology for last mile communication. This innovative low-power and long-range technology is used by the local controller for communicating with Urbana Lamps.
Produced by Urbana Solutions
Clickey Desk Sensor
Device for measuring occupation of flexible workplaces and meeting facilities. A convenient application within a smart building concept.
Produced by CLICKEY
DOM Protector®
IMST has developed the online version of the electronic knob cylinder DOM Protector® made by DOM Sicherheitstechnik. An intelligent wireless interface connects the cylinder to a switch box near the door. The locking system can be monitored and programmed online using the on-site Ethernet network infrastructure. The space-saving design of the wireless electronic system and its battery allow to integrate easily into the knob cylinder. The technology makes very efficient use of the battery to keep power consumption low.
Produced by DOM
MCF-LWWS00 - LoRaWAN® Weather Station
MCF88 integrates a LoRaWAN® communication system in a Davis Instruments Vantage Pro2 Weather Station. The station, rugged and flexible, is equipped with a wide range of sensors and it offers reliable weather data under the most demanding circumstances.
Produced by Enginko
N02h. Real-time groundwater monitoring
For the vertical market of groundwater monitoring, which consists of millions of manually measured monitoring wells, Senzorro developed a wireless sensor package equipped with long range radio and high precision. The self-contained integrated battery operated device sends its measurements to a central monitoring server in real time at a previously unseen price point. Measurement data is transmitted to a central server which processes, validates and distributes data for analysis, visualisation and reports.
Produced by SENZORRO
MCF-LW12TERWP - LoRaWAN® outdoor environmental sensor
This IP67 battery powered sensor reads temperature, humidity and pressure and sends collected data over the LoRaWAN® network. Ideally suited for a wide range of applications such as weather stations, urban monitoring, air quality, industrial, environmental or farming projects.
Produced by Enginko
MCF-LW12CO2 - LoRaWAN® indoor environmental sensor
This device reads temperature, humidity, pressure, light intensity, VOC and CO2 and sends collected data over the LoRaWAN® network. Ideally suited for a wide range of applications such as building automation, condition monitoring, predictive maintenance, security, healthcare and many more use cases.
Produced by Enginko
Smart Home
A smart home is the interaction of household and multimedia devices, which can be remotely controlled by the resident of the household. In addition to the automation of everyday processes, the ambient conditions can be optimally adapted by adjusting the light, heating, etc. to the individual resident. In addition to the control via the smart phone, voice commands and hand signals for the smart home system are easily recognizable, which make individual user profiles of individual users possible.
Ritto Handylink
IMST helped develop the HANDYLINK, the innovative door intercom system. If you are not at home when door bell rings, your mobile phone will alert you and, thanks to the integrated GSM module, allow you to speak with the visitor. The HANDYLINK system also lets you use your mobile phone as a remote control for specific devices in your house.
Produced by Ritto
RWE Smart Home Power Controler
The RWE SmartHome Power Control system of the RWE Effizienz GmbH is a Solution of IMST. In conjunction with the SmartHome central control unit, RWE SmartHome Power Control allows the straightforward reading of meter data from an electronic household meter (EDL21). The system consists of the customer specific designed infrared reader iM871A-ir and the IMST’s wireless M-Bus USB stick iM871A-usb. Main component of both devices is the radio module iM871A from IMST. The magnetically adhering reading unit has an infrared interface for reading the current power and energy of the electronic household meter. Communication between iM871A-ir and iM871A-usb is done via Wireless M-Bus radio protocol.
Produced by RWE
Clickey Desk Sensor
Device for measuring occupation of flexible workplaces and meeting facilities. A convenient application within a smart building concept.
Produced by CLICKEY
MCF-LW12CO2 - LoRaWAN® indoor environmental sensor
This device reads temperature, humidity, pressure, light intensity, VOC and CO2 and sends collected data over the LoRaWAN® network. Ideally suited for a wide range of applications such as building automation, condition monitoring, predictive maintenance, security, healthcare and many more use cases.
Produced by Enginko
EGK-LW22PLG - LoRaWAN® Energy Meter plug with On/Off
The MCF-LW12PLG is a compact meter that can monitor and switch a 230Vac-16Amp Load, equipped with a rechargeable battery for mains outage detection, configurable default power-on status, setup and upgrade via NFC with LoRa Tool App.
Produced by Enginko
Smart Industry
Even in times of digitization, industry is changing and increasingly relying on automation of manufacturing processes. Smart Industry offers manufacturers the ability to continuously monitor, analyze and optimize production processes through the use of IoT. Even more complex production processes can be simplified with the help of the latest technologies. This has a significant impact on throughput times and offers great cost saving potential.
TLM454 - LoRaWAN® EndNode Modem with Modbus TCP/RTU Scheduler
REDZ TLM series LoRaWAN EndNode Modem can read field Modbus TCP and RTU devices and share data with LoRaWAN Server. Up to 10 commands can be defined for Modbus Reading. Scheduler is versatile and also TLM has bult in mechanism to automatically send data based on duty cycle and payload size limitations so that user do not have to make calculations for that.
Produced by REDZ Smart Communication
TLM254 - LoRa® Radio Modem
REDZ TLM Series Radio Modems can create a LoRa Based RF network and connect Serial and/or ETH based devices with each other. All communication can be done over 868MHz Radio Frequency network, based on LoRa standard. TLM Series LoRa Based Radio Modems can act as TCP to Lora Gateway, Serial to LoRa Gateway all in one device. It can instantly make Radio network for all addressable protocols including Mosbus TCP and RTU.
Produced by REDZ Smart Communication
STG254 Wireless M-Bus – Modbus TCP/RTU Gateway
REDZ STG Series Wireless Mbus – Modbus TCP/RTU Gateway can get Wireless Mbus (WMBus) packages from field devices and convert data based on WMBus OMS to Modbus TCP or RTU protocol. STG series can decrypty up to 16 messages base on AES decryption. Up to 20 device can be read via Modbus protocol. STG can also act as transparent gateway between WMBus devices and field TCP/IP or Serial devices.
Produced by REDZ Smart Communication
MCF-LW06420 - 4-20mA/0-10V to LoRaWAN® interface
This interface has two 4-20mA and two 0-10V input channels. All these inputs are opto isolated and are useful to connect any kind of analog sensor and to forward measurements to the LoRaWAN® platform.
Produced by Enginko
MCF-LW13MIO - LoRaWAN® Multi I/O module
This device transmits the state of its 16 inputs and controls 8 outputs through the LoRaWAN® network. All these inputs and outputs are galvanically isolated. It can be used for industrial process control, home automation, water treatment, agriculture irrigation and similar applications.
Produced by Enginko
CLR-ED1. Remote monitoring and control of sensors and actuators
Based on the new LoRa® technology, with the CLR-ED1 radio module it is possible to meet specific monitoring needs, allowing the detection of a multiplicity of parameters, for example environmental, energetic , traffic.
With the Colora CLR-Ed1 radio module from Coing, remote management of processes and products based on an innovative and efficient wireless architecture can be considered as an enabling tool for new applications and the implementation of intelligent automations to make a more efficient and effective process/product.
Produced by COING
Sense2Grow Wireless IO
With the Sense2Grow Wireless IO you have the possibility to monitor and read your business systems and sensors wireless. The WIO uses standard interfaces and together with the support of configurable software, the connection is established. The WIO communicates via LoRa® RF technology. Therefore, you are guaranteed a reliable wireless communication, both in the greenhouse, buildings and industrial site as well as in the open field.
Produced by Technolution
Clickey Pro
Professional device equipped with 6 freely programmable I/O ports. It allows external systems or processes to be connected in order to read or control them remotely.
Produced by CLICKEY
MCF-LW13IO - LoRaWAN® wireless actuator
This device can transmits the status of its input and control the output through the LoRaWAN® network. It can be used for industrial process control and home automation, water treatment, agriculture irrigation and similar applications.
Produced by Enginko
MCF-LW12TERWP - LoRaWAN® outdoor environmental sensor
This IP67 battery powered sensor reads temperature, humidity and pressure and sends collected data over the LoRaWAN® network. Ideally suited for a wide range of applications such as weather stations, urban monitoring, air quality, industrial, environmental or farming projects.
Produced by Enginko
CLR-ER. Intelligent control and monitoring of energy elements
Based on the new LoRa technology, the CLR-ER radio module allows control and monitoring of energy-consuming elements. It becomes possible to monitor the absorbed energy for diagnostic purposes, activate an On / Off command to enable / disable the power supply, and possibly perform dimming (for example in the case of LED lamps).
CLR-ER has been designed and produced with a high degree of customization in order to allow easy adaptation to the requests of different applications.
Produced by COING
Sense2Grow Smoke
With the Sense2Grow Smoke you have a wireless smoke detector that can locate smoke sources quickly and accurately. The Smoke is fitted with a solar cell with battery which makes recharging unnecessary. When you hang the Smoke in a dark room you can suffice with recharging the battery on an annual basis. You are guaranteed a reliable wireless communication, both in the greenhouse, buildings and industrial site as well as in the open field. The status of the system and the sensor batteries are displayed on your dashboard.
Produced by Technolution
Clickey Tempsens Pro
Professional device for recording the temperature of objects, machines, lines, areas and refrigerators. Including alarm function when temperature is outside the set ranges. Can be used for automatic temperature registration.
Produced by CLICKEY
Clickey GPS
Professional device for outdoor asset management. Including movement detection and track & trace via GPS.
Produced by CLICKEY
Smart Security
Smart home applications simplify various daily routines through the use of communication technology. But the use of technology can not only give us a comfortable, but also a secure life. With the help of Smart Security products, things or buildings can be monitored, people tracked and data analyzed and stored. Due to the state of the art today, an alarm via smartphone and the triggering of an automatic call to the police or security service is feasible.
NOX TXO v2 - wireless alarm
The optical NOX TXO v2 wireless alarm is well-suited for the individual contactless safeguarding of pictures, paintings and other exhibits. The electricity supply is ensured through two internal batteries, which, depending on use, make possible year-long maintenance-free operation. Monitoring is done through the NOX central unit, which correspondingly transmits the requested alarms . The compact casing allows for discrete use of the NOX TXO on smaller exhibits.
Produced by NOX
Clickey PIR
Wireless LoRa motion detector which automatically sends a motion detection alarm.
Produced by CLICKEY
Clickey GPS
Professional device for outdoor asset management. Including movement detection and track & trace via GPS.
Produced by CLICKEY
MCF-LW12CO2 - LoRaWAN® indoor environmental sensor
This device reads temperature, humidity, pressure, light intensity, VOC and CO2 and sends collected data over the LoRaWAN® network. Ideally suited for a wide range of applications such as building automation, condition monitoring, predictive maintenance, security, healthcare and many more use cases.
Produced by MCF88
LoRaWAN® Gateways
LoRaWAN® network architecture is deployed in a star-of-stars topology in which gateways relay messages between end-devices and a central network server. The gateways are connected to the network server via standard IP connections and act as a transparent bridge, simply converting RF packets to IP packets and vice versa.
Move Solutions Outdoor Gateway 002
Move Solutions Gateway is a product with a very high value for money. It is based on IMST iC880A concentrator. Being developed for IoT and Structure health monitoring applications, it can connect via LoRaWAN to hundreds of devices, collect all the data and forward it to the internet Cloud Platform via 2G/3G/LTE cellular connection. It has an outdoor IP67, easy to install, sturdy housing suitable for many situations. Power supply with common 220v plug.
Produced by Move Solutions
LoRa FlexGate™ FGWAT3L8-26465. Outdoor LoRa® Gateway
The FlexGate™ FGWAT 3LR 264 65 is a multiservice outdoorLoRa Gateway part of the FlexGate™ product line.
This product line has been designed to bring hardware and software flexibility to meet the IoT technical challenges. Beyond LoRa support, FlexGate™ FGWAT3LR-26465 offers a flexible Cloud and field connectivity within a unique platform ready to adapt to local configuration and facilitate deployment, maintenance, and installation.
Produced by EXPEMB
LoRa FlexGate™ FGWAT3LR-14432. Industrial LoRa® Gateway
The LoRa FlexGate™ FGWAT 3LR 144 32 is an industrialGateway based on Intel Atom processor designed for Industrial Internet of Thing applications. Offering a wide range of options, it is the ideal Gateway to match different use cases on the field including Edge and Fog computing.
Produced by EXPEMB
LoRa FlexGate™ FGWAT3LR-12132. Development LoRa® Gateway
The LoRa FlexGate™ FGWAT 3LR 121 32 is a developmentGateway based on Intel Atom processor designed for Industrial Internet of Thing applications. Offering a wide range of options, it is the ideal Gateway to match different use cases on the field including Edge and Fog computing.
Produced by EXPEMB
AAEON AIOT-ILRA01 - Indoor LoRa® Gateway and Network Server
Industrial PC solution powered by Intel Quad Core ATOM 1,92GHz CPU, with LoRa® radio functions performed by 868MHz solution, SPI 8 channels IMST concentrator iC880A (SX1301 processor).
This product is capable to run in the same box:
- Network Server
- Application Server
- Gateway
- Packet forwarder
Produced by AAEON
Lorank 8
The Lorank 8 is the first affordable LoRa® Gateway with professional specifications. With almost 50 DSP pipes on board it processes 8 LoRa® transmissions simultaneously. This enables the connection with several tens of thousands end nodes around the gateway. And, with a sensitivity of -138 dBm and a maximum power of 500 mW you can easily reach the most distant nodes.
Produced by Ideetron
Kontron TRACe LoRaMQTT – Industrial LoRa® Gateway
Kontron TRaCe LoRa-M QTT is an EN50155 fanless solution ready platform offering LoRa® local network and transforming messages to MQTT streams. The Kontron TRACe LoRa-MQTT embeds a LPWAN (Low Power Wide Area Network) LoRa® radio concentrator that can sustain 8 communication channels simultaneously and Ethernet connectivity from one of the 2x GbE front M12 X-Coded connector.
Produced by Kontron